What tools is needed for the installation of laminate flooring?

1. Hammer. The hammer is used to push the planks of laminate flooring to its right position after the planks are locked with each other.

2. Tapping block: The tapping block, made of plastic or wooden materials, is put following the locking system when hammer is worked on the planks to protect the click.

3. Spacer: The spacer, made of wooden or plastic material, is put between plank and wall when hammer is worked on the planks to protect the plank.

4. Saw: The saw is used to cut the planks of laminate flooring neighboring to the wall to make the planks suit for the dimensions of room.

5. Rule: Rule is used to measure the length of spare space and helped to mark straight line on the planks to be cut.

6. Pull bar: The pull bar is used to fasten the locking system of planks neighboring to the wall. It is not convenient to use hammer at the joint of planks and wall. The pull bar makes the work easy.

Article Source: http://www.new.citynewslive.com

This article is indexed from China laminate flooring.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated